| ATTL-GUARD Product |
Emulsion | ~% Solids ~[% F] |
Flash Point Close Cup |
Product Information |
| F-5M7 | Cationic | ~28
[~ 5 ] |
> 100 oC | Economy grade suitable for all fabrics - Optimized
for Nylon and Nylon blends |
| F-23G3 | Cationic | ~28
[~10] |
> 100 oC | Durable O&WR suitable for all fabrics, excellent for
polyester. Outstanding emulsion that is compatible
with most resins and other finish bath additives. |
| F-23M4 | Weak
Cationic |
~28
[~8 ] |
> 100 oC | Excellent and Economical for Synthetics and
Synthetic blends. Works well on Cellulose. |
| F-35G3 | Weak
Cationic |
~28
[~10] |
> 100 oC | For Nonwovens - Soft hand - needs a cross linker for
durability. Excellent on cottons |
| F-45G2 | Weak
Cationic |
~20 [~4 ] |
> 100 oC | Durable soft hand with low yellowing. Low cure
temperature with low mark-off. |
| F-82G3 | Amphoteric | ~28
[~10 ] |
> 100 oC | High durability - excellent for cotton and synthetics -
Low VOC content - Low cure temperature |
| AF-89G3 | Cationic | ~28
[~9 ] |
> 100 oC | Anti-Static DWR - designed for use on Polyester
and Polyester blends. Excellent on Polypropylene. |
| F89G3 | Weak
Cationic |
~28
[~9 ] |
> 100 oC | Designed for use on Polypropylene - Low cure
temperature - Very compatible with other additives |
| F-55G2 | Very Weak
Cationic |
~28
[~9 ] |
> 100 oC | Grease, oil, and water repellent for paper packaging
products. Not approved for direct food contact. |
| F-32G9 | Very Weak
Cationic |
~25
[~1.5] |
> 100 oC | Concrete and/or wood products - For use where cure
temperature is > 270 oF. For addition into fiber
board mixes. Product yellows slightly on aging. |
| F-37G9 | Amphoteric | ~24
[~1 ] |
> 100 oC | Concrete and/or wood products - "Air Cure" spray
application to Concrete or Wood Products. Product
yellows slightly on aging |
~[% F] Close Cup [~0 ] [~0 ] [~0 ] [~0 ] [~1 ] [~4 ] [~6 ]
ATTL-EASE
Product
Emulsion
or
Dispersion~% Solids
Flash Point
Product Information
SR-T
Nonionic
~12
> 100 oC
Superior wicking with good soil release on polyester.
Can be exhausted or pad applied. Reduces static
cling. Hydrophilic.
SR-T28
Nonionic
~28
> 100 oC
Same as ATTL-Ease T but at ~28% active
SR-T extra
Nonionic
~12
> 100 oC
Extra wicking makes this the best product for
moisture transport away from the body. Good soil
release properties on Polyester. Can be exhausted
or pad applied. Reduces static cling. Very
hydrophilic.
SR-PA
Anionic
~14
> 100 oC
Superior soil release properties on Polyester and
Polyester blends. Work well with Crease Resistant
Finishes [CRF] on Polyester blends when pre-exhausted on the Polyester.
SR-84T9
Nonionic
~28
> 100 oC
Excellent oil repellency and oil release. Very
hydrophilic.
SR-11G3
Very weakly
cationic
~21
> 100 oC
Excellent soil and oil release combined with good
water and oil repellency to small spills.
SR-370G3
Amphoteric
~22
> 100 oC
" Air Curable" O&WR. Can be cured at very low
"dry off " temperatures. Should not be heated
above 120 OC
Applied Textile Technologies, Ltd. (ATTL) has a full range of products that can be used to optimize the overall performance of end use products that get fluoropolymer application.
Some of these products are:
ATTL-Scour JP-SZ2 - Special scour for preparation that does not interfere with the final DWR
performance.
Aptex Product STF-4 - Chelate and stabilizer for use with ATTL-Scour JP-SZ2.
ATTL- Lev range of levelers for all fibers each designed not to interfere with final Fluoropolymer performance.
ATTL-Clear AD-5 - Special none reductive clear for polyester made specifically not to interfere
with Fluoropolymer performance. Also removes trimer.
Foamcutter ERS - Defoamer/Wetter for use in pad application of Fluoropolymers.
Foamcutter FC-5 - Special defoamer/wetter for use in spray application of O